info@eleccommc.com

ElecComm Blog

RSS Grab ECC RSS Feed

ElecComm is Hiring Underground Electrical Cable Installers and Pullers in Massachusetts

Joseph Coupal - Tuesday, May 15, 2012

ElecComm is currently looking for Underground Electrical Cable Installers and Pullers. Role and responsibilities includes: installing and constructing of plant and equipment; directs and trains employees of an equal or lower rating; and incumbents work under general supervision.

The position includes directing and performing functions associated with cable, electrical equipment, and conduit to install, and/or remove. Operates trucks and equipment of any size in conjunction with inspecting, installing, connecting, disconnecting of conductors, and other plant and equipment. Assist or be assisted by personnel of a higher, equal, or lower rating for all tasks within the line of progression.

Must have full knowledge of: The Fundamentals of electricity; the layout, functions and construction of the underground electric system; the theory and practices of splicing, the standards and specifications for installation, removal and repair of he underground electric systems; the practices, principles of operations and the proper applications of equipment as prescribed by the Company for safety and first aid.

For more information, click UG Lineworker Leader, or contact ElecComm by calling 866-466-2931.

ElecComm Begins Fiber Splicing for the Open Cape Project

Joseph Coupal - Friday, May 04, 2012

ElecComm splice crews commenced fiber splicing on the Open Cape Project. Crews are installing fiber optic cable ends into Coyote splice enclosures. The cable ends will be butt spliced together in order to complete the main run or backbone cable for the project. Each splice location needs to have a 144 fiber strands fusion spliced together. Once the backbone is complete, work will begin on laterals – connecting municipal buildings, businesses , and communication hubs.

Picture of Splice TrayDisplays ID tag showing directions of the cable is going. This cable routes towards Fall River.Picture of fiber splice tray which hold the strands of fiber secure and neat. Each fiber  tray holds 48 fusion splices.  Technicians complete three splice trays for a total of 144 fusion splices per location.Display of a Coyote aerial splice enclosure.  Splice enclosures are an air tight container that helps keep the fibers strands and fusion splices dry and clean.
Click on Images to Enlarge and to Read Descriptions

4000 Without Power in Boston - ElecComm Crews Mobilizes to Assist NStar Restore Power

Joseph Coupal - Thursday, March 15, 2012

ElecComm crews mobilized to the City of Boston to assist NStar with the restoration of power and have worked around the clock. There are still 4000 without power.

ElecComm responded to the NSTAR power outage with several crews and helped to restore power to the City of Boston. ElecComm crews ran 13,000 Volt lines along Stuart St. and spliced cable. They also ran cable in the Marriott downtown. ElecComm was ready and dispatched to various locations in the City of Boston.

(click on the images below to enlarge)

Below is the original article from Boston.com:

BOSTON — About 4,000 customers remain without power a day and a half after a smoky electrical transformer fire in Boston's Back Bay area knocked out electricity to about 21,000.

NStar crews worked through the night into Thursday morning.

NStar said the goal is to get everyone back online by about noon Thursday.

The utility installed temporary cables and dozens of generators to bring back power until permanent repairs can be made, but the extensive work was taking longer than first expected.

There were still traffic restrictions, but no problems were reported. The Massachusetts Turnpike's Exit 22 ramps to Copley Square and Prudential Center were closed to allow for the electrical work.

All subway stations in the area reopened Wednesday afternoon.

Source: Boston.com

Cap Cod "Fiber is Rolling" Construction Kickoff Media Event February 27, 2012

Joseph Coupal - Thursday, February 23, 2012

An official "Fiber is Rolling" construction kickoff media event on Cape Cod for Feb 27 at 11 a.m. at local cable station C3TV's large studio.

We're hoping that the event will be streamed live to desktops, so on the chance you are unable to make it, you can still view the event. We're still sorting out the entire speaker lineup. Confirmed to speak are Congressman Keating and State Sen. Dan Wolf, the chair of Barnstable County commissioners.

We also have three state reps attending. Invitations are going out to Verizon, National Grid, NStar, Statewide, Otis, WHOI, some large businesses,and all media will be invited.

Fiber for OpenCape Project Rolled Out this Week in Brockton MA

Joseph Coupal - Thursday, February 23, 2012

FIBER ROLLING: ElecComm's Angel DeJesus (center) attaches an orange winch line to the inaugural spool of the OpenCape Network fiber optic cabling this week in Brockton, MA, while Christian DeJesus (left) and Bob Mcgyvers (right) help ready the 9000-foot long cable.

The winch line pulls the fiber to the top of utility poles along the network's route. This first two-mile segment marks the start of the regional network's construction, which is funded by federal BTOP and state broadband funds. CapeNet, which is coordinating the build, said the planned 350 miles of fiber will provide core fiber optic infrastructure on Cape Cod and across large portions of the south coast and Plymouth areas. The company expects to complete construction within 10 months.

To learn more about the OpenCape Network, visit their website here.

Source: CapeCodToday.com


Recent Posts


Tags


Archive