ElecComm to Remove Existing and Install New Transformer - Phillips Academy, Andover, MA

Posted by

ElecComm can replace transformers and  install transformers. This particular transformer is 75kVA Liquid Filled Padmounted transformer for Phillips Academy. The primary voltage, configuration, and the basic lightning impulse insulation level (BIL) is 2400 volt, Delta, 60 kV BIL.

ElecComm will mount the transformer on existing concrete pad, connect the primary and secondary conductors to the transformer and maintain the same loading/phasing arrangement as existed

ElecComm will coordinate de-energizing and re-energizing of the transformer with the Academy. Grounding of the transformer will take place as well as testing wiring and connections for continuity and grounds.
If you need a transformer replaced and installed, please contact ElecComm.