info@eleccommc.com

Mechanical VS Fusion Splices – Which Type of Fiber Optic Splicing Is Better? - Plymouth, MA

Posted by

If you have heard of telecommunication networks in Plymouth, MA, you have probably heard of fiber optic splicing as well. These networks use optical fibers instead of copper wires because of the many advantages. They are spliced together in order to improve the overall reliability, security, capacity, and stability of the networks paving the way for more effective telecommunications.

The two types of fiber optic splicing are used in different applications. The mechanical type is used for applications where splices need to be made very quickly or the expensive equipment required for fusion splices may not be available. This type is also a better alternative where the splice may be less permanent as it allows easy connection and disconnection.

The fusion type is used for the long high data rate lines that are unlikely to be changed once installed. Fusion splices offer a lower level of transmission loss and a high degree of overall performance as compared to the mechanical splices. It also will require the use of expensive equipment for melting or fusing the two ends of the optical fibers together. The equipment provides a computer-controlled alignment of the optical fibers thereby paving the way for a lower level of transmission loss in telecommunication networks.

To find out more about fiber optic splicing in telecommunication networks, contact ElecComm.